Berlin 1000 | Elevator Cabins

ü Cabin Interior Covering 

Horizontally laid satin stainless

ü Cabin Interior Accessories 

Mirror Stainless

ü Cabin Mirror 

Half length, 6 mm bisote mirror

ü Cabinet Base 

20 mm natural granite

ü Cabin Ceiling 

Open inside, mirror stainless, laser cut pattern

ü Cabin Handrail 

Single stainless handrail

ü Ventilation 

Square Fan 220V 12/12, Custom Fan 220 V 15/60 on request

Cabin Interior Decoration

The interior coatings of our LIBERTY elevator cabin we produce are made of satin stainless steel. Satin stainless coatings are designed by laying horizontally. The side walls of our elevator cabin are designed as 5 pieces, 2 pieces satin stainless steel under the mirror. According to our customers' preferences, the interior coating patterns of our elevator cabin can be changed.

Elevator Cabin Interior Accessories

In our LIBERTY model elevator cabin, mirror stainless steel was placed as an accessory between the satin stainless steel.

Elevator Cabin Mirror

In our elevator cabin, a half length 6 mm bisote mirror is used on the rear wall.  

Elevator Cabin Floor

The floor section of our LIBERTY model elevator cabin is made of 20 mm thick natural granite stone. According to customer preference, special granite stone and PVC floor covering can be applied to the elevator floor.

Elevator Cabin Ceiling

In our LIBERTY model elevator cabin internal electrical installations and lighting are ready to use in the elevator ceiling. The ceiling part of our elevator cabin is designed as a hinged system with internal opening. In this way, the lighting inside the elevator ceiling can be easily changed from inside the cabin without going over the cabin. Elevator ceiling consists of patterned laser cut mirror stainless sheet.

Elevator Cabin Handrail

The inner handle of our elevator cabin consists of a stainless handrail. Thanks to the handrail fixing application in our elevator cabins, loosings that may occur over time can be easily removed from the elevator cabin by tightening the handrail bolt. At the same time, if the cabin rail is to be changed, it can be easily changed from inside the elevator cabin.

Elevator Cabin Ventilation

Our elevator cabin internal ventilation system has ventilation holes at the bottom of the elevator cabin walls. In addition, there is a 220 V 12x12 square fan ventilation system inside the cabin ceiling. Optionally, 220 V 15/60 special fan system is provided, which provides stronger air flow.

Other Features

Our LIBERTY Model elevator cabin walls have an external plug-in system, providing ease of installation during the difficulties encountered during installation. Along with the elevator cabin, standard bolted railing, skirt sheet, tube magnetic sheet, flexible wedge connection sheet and railing foot crash sheet are delivered.

Usage places

Our LIBERTY model elevator cabin is preferred more in residences, villas, hotels and workplaces.

Similar products

Some of our featured products