Tokyo 1040 | Elevator Cabins

Cabin Interior Coating 4 + 4 mm tempered, colored and patterned laminated glass
Cabin Interior Accessories Satine Stainless
Cabin Interior Mirror 1/3 2 pieces Full length, 6 mm bisote mirror
Cabinet Base 20 mm Special natural granite
Cabinet Ceiling Opened inside, satin stainless, laser cut pattern
Cabinet Handrail Four stainless handrail
Ventilation Square Fan 220V 12/12, upon request Special Fan 220 V 15/60
Cabin Interior Decoration
The interior coatings of our QUEEN elevator cabin we produce consist of 4 + 4 tempered colored and patterned laminated glass coating. Laminated glass coatings are designed by laying horizontally. The side walls of our elevator cabin are designed as 5 pieces patterned colored glass coating. According to the preferences of our customers, the laminated glass coating colors and patterns of our elevator cabin can be changed.

Elevator Cabin Interior Accessories
In our QUEEN model elevator cabin, satin stainless steel is placed between laminated glasses as an accessory.

Elevator Cabin Mirror
1/3 two pieces full length 6 mm bisote mirror is used in our elevator cabin.

Elevator Cabin Floor
Special natural granite flooring has been installed in the floor section of our QUEEN model elevator cabin. According to customer preference, special or standard natural granite stone coating can also be applied to the elevator floor.

Elevator Cabin Ceiling
In our QUEEN model elevator cabin internal electrical installations and lighting are ready to use in the elevator ceiling. Lighting is enhanced using spotlights. The ceiling part of our elevator cabin is designed as a hinged system with internal opening. In this way, the lighting inside the elevator ceiling can be easily changed from inside the cabin without going over the cabin. Elevator ceiling consists of patterned laser cut satin stainless steel.

Elevator Cabin Handrail
The interior handle of our elevator cabin consists of four half-length stainless handrails in front of the mirror. Thanks to the handrail fixing application in our elevator cabins, loosings that may occur over time can be easily removed by tightening the handrail bolt through the elevator cabin. At the same time, if the cabin rail is to be changed, it can be easily changed from inside the elevator cabin.

Elevator Cabin Ventilation
Our elevator cabin internal ventilation system has ventilation holes at the bottom of the elevator cabin walls. In addition, there is a 220 V 12x12 square fan ventilation system inside the cabin ceiling. Optionally, 220 V 15/60 special fan system is provided, which provides stronger air flow.

Other Features
The fact that our QUEEN Model elevator cabin walls are externally fitting system provides ease of installation during the difficulties encountered during installation. Along with the elevator cabin, standard bolted railing, skirt sheet, tube magnetic sheet, flexible wedge connection sheet and railing foot crash sheet are delivered.

Usage places
Our QUEEN model elevator cabin is preferred more in residences, villas, hotels and workplaces.

Similar products

Some of our featured products